CNC Information | Learn CNC | CNC Programming G-Code

I got this email question and thought I would post it.

Hello,

You should be able to either change the post processor in the CAM Program or change pieces of how it post processes. This is a very common problem when setting up your system.

Look in your CAM Software Owners Manual on how to do it for your Software.

Have a good one,
Ivan


emil4love wrote:
hello
i have cnc machine (trumpf)and when i draw the project in catcam it make a G code different than the machine accept it

Hi Ivan.
All i do, is to compare the generated Gcode file from a cam soft to the sample one my machine has for testing.
If somethings wrong with the g code lines ( on the machines screen shows the error line )i do the changes in the pproccesor the cam provides.
Some Cam softs does not allow you to make direct changes in their pps.
Bill