Search Google

Search CNC Information

Pick Your Native Language!

Untitled Document English CNC Information Arabic CNC Information Bulgarian CNC Information Chinese (Simplified) CNC Information Chinese (Traditional) CNC Information Croatian CNC Information Czech CNC Information Danish CNC Information Dutch CNC Information Finnish CNC Information French CNC Information German CNC Information Greek CNC Information Hindi CNC Information Italian CNC Information Japanese CNC Information Korean CNC Information Norwegian CNC Information Polish CNC Information Portuguese CNC Information Romanian CNC Information Russian CNC Information Spanish CNC Information Swedish CNC Information
CNC Info Forum
Welcome, Guest
Please Login or Register.    Lost Password?
CNC Info Forum Learning CNC: CNC Newbie Questions
THREAD MILLING..???? (0 viewing) 
Go to bottom Post Reply Favoured: 0
TOPIC: THREAD MILLING..????
#777
JKMACH (User)
Fresh CNC Boarder
Posts: 2
graphgraph
User Offline Click here to see the profile of this user
THREAD MILLING..???? 4 Months, 1 Week ago  
HI GUYS.
I WOULD REALLY LIKE TO LEARN HOW TO PROGRAM THREAD CUTTING.
CAN ANYONE MAYBE SEND ME A SMALL PROGRAM THAT I CAN RUN ON
THE MACHINE AND SEE HOW IT WORKS??
THIS IS SOMETHING IVE COME UP WITH AND WHEN I SIMULATE THE
TOOL PATH IT LOOKS OK.........I JUST USE A G3 INTERPOLATION
BUT FEED DOWN ON THE Z AT THE SAME TIME SO IF THE PITCH OF THE
THREAD IS SAY 3MM THEN AT THE END OF THE G3 COMMAND I PUT IN A Z-3.O
THE ONLY PROBLEM IS IF THE THREAD IS SAY 60mm DEEP THEN I GOT TO TYPE THE
G3 LINE IN LIKE 20 TIMES BUT CHANGE THE Z VALUE FOR EACH LINE.
WHAT DO YOU THINK?
ANY SUGGESTIONS?
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by CNC Informationget the latest posts directly to your desktop
 
CNC Information