CNC Information | Learn CNC | CNC Programming G-Code

Hi everybody!

I got my first 3Axis CNC Router this summer.
Now i have this problem that I Have to "Cickstart" the Spindel
to make it run. I have to first spinn it manualy, just like you can sometimes experiense with a Discman. The company I bought it from just says that there might be a puls to short to make it start , and that the prolem is all with programming and not hardware. By that i mean programming with in the machine and not the g-codes.
I might have don something with the spindel settings by mistake but I realy doubt this. Does anybod know anything about this? or where i can start locking for the solutins. (exept pocing the compay wich i wil do again soon if im not getting anyware soon.)

Thanx in advance!

Ivar.

Dude have you tried spindle orientation?

What controls do you use on yre machine?

For example siemens uses G19 for orientation, used at the beginning of each program otherwise it wont turn in M03 or M04

example G19 S600 M03- orientation, speed and direction.

I Have all chinese equipment. Best I can do to answer, is to attach my manuals. (If you are not bored to have a brief look at them(which I'd completely Understand)
I've just began to understand how things work,
I had some help from the vendors adjusting some parameters, but this particular problem even of the machine hasn't ben able to sort out yet.
The real bad thing is that sometimes the spindel starts by it self, but mostly not. I don't like this inconsequence.

I ment to say:

"but this particular problem even of the vendors hasn't ben able to sort out yet."

Here I atached the other manual for the AC drive

Ah... The manual was to big... hm...