Learn CAD
What I used to do…
Before I found design software I was in the stone ages. I would actually hand lay out a template on a piece of paper. Then cut it out. Next, I would tape the design onto a piece of steel and trace around it with a Sharpe Marker. Finally, I would cut out the piece I wanted.
No matter what, it was never exact. There would always be something wrong. Things like wavy lines, gouges and "unique parts" were the norm. Measurements were never as exact as I would have liked either. That usually caused some fit-up issues, followed by some grinding. If you know anything about fabrication, grinding is the enemy of your time.
Why use Design Software?
I knew there had to be a better way so I found some design software to try out. Yes, it does take some time to learn. Think about it, like anything else in life, something that is worth it takes some time. This is also the situation of taking one step backwards to move ten steps forward.
Here are some advantages of using Design Software:
Saved file you can use over and over
Transfer the design to others
Can use exact measurements
Repeatability in design
Here are some disadvantages of using Design Software:
Cost money
Takes time to learn
May not be the quickest way of making something if it is a "One Off"
CNC Learning
Menu
Reference