U.S Vice President, Biden visits Ukraine to show U.S support to the pro-western policy of Ukraine and to get to know the presidential candidates
U.S. Vice President Joe Biden has made a three day working visit to Ukraine. And he has made statements of both non-political as well as political nature while he has been there. What caught the international and domestic press immediate attention were his comments on the Ukrainian women. Well, it is a compliment that a Vice President makes this statement and could maybe boost a segment in Ukrainian business, who knows?
U.S. Vice President Joe Biden, on a visit to Kyiv during July 21st – 23rd , has delivered a positive message to a beleaguered Ukraine. Despite Kyiv’s paralyzing domestic political feuds and a deep recession, Biden said Washington’s efforts to repair strained ties with Russia will not hurt U.S. support for Ukraine’s push to integrate with the West. Biden — who is on a tour that will also take him to Georgia — made his comments at a joint news conference in Kyiv following talks with President Viktor Yushchenko.
U.S Vice President and Ukrainian women
Wherever Joe Biden goes, so does his mouth. Meeting today with Ukrainian President Viktor Yushchenko in Kyiv, the vice president lived up to his reputation for loose lips making himself out to be a horndog-in-waiting. “I cannot believe that a Frenchman visiting Kyiv went back home and told his colleagues he discovered something and didn’t say he discovered the most beautiful women in the world. That’s my observation,” he told Yushchenko. “It’s certain you have so many beautiful women.”
The U.S Vice President got to meet the sitting president, prime minister and presidential candidates of Ukraine during his meeting. Biden got to cover lots of various topics, but we do not know any details apart from what was said in the various press conferences straight after meetings or by the Ukrainian party afterwards. It is worth mentioning that the pro-western policy of Ukraine was supported by U.S. However, it remains to see what the retorics is worth when it comes to politics in reality. U.S sold out Ukraine in its EU campaign in order to keep their foot in the missile program in former Soviet states in Eastern Europe. However, has proved to be an important economic partner for Ukraine, but not as important as European countries have proven to be in the last decade.
Below, you will find a short summary from each meeting Biden had with his Ukrainian politicians. It also reflects the Ukrainian press coverage of the meetings, and it is interesting to see that the press covers more of Yanokovich’s meetings with Biden than the three others together.
Biden says to President Viktor Yushchenko that Ukraine need not worry about U.S.-Russia ties
Vice President Joe Biden assured a nervous Ukraine that its interests won’t be sacrificed as the United States tries to mend ties with Moscow.
Visiting Kyiv two weeks after President Barack Obama attended a Moscow summit, Biden said Russia can claim no “sphere of influence” in its backyard. The U.S. vice president travels next to another former Soviet republic, Georgia, which lost a five-day war with Russia last year over separatist provinces that Moscow insists are independent states.
Russia has responded angrily to efforts by the pro-Western leaders of Ukraine and Georgia to distance their countries from Moscow and seek NATO membership.
As confrontation simmers between Moscow and the West over Ukraine’s future, Biden signaled that Russia has no special rights in the region.
“We do not recognize – and I want to reiterate it – any sphere of influence,” Biden said after meeting with pro-Western President Viktor Yushchenko. “We do not recognize anyone else’s right to dictate to you or any other country what alliances you will seek to belong to.”
Before Biden even spoke, Russia had warned the United States to tread lightly when it courts Moscow’s neighbors.
Russian Foreign Ministry spokesman Andrei Nesterenko said all nations are free to choose their partners, but added: “It is important that this be done transparently, without under-the-carpet games and not at the expense of others’ interests.”
Nesterenko suggested Russia’s traditional ties with Ukraine give it a bigger stake in the country’s future, saying nations dealing with Ukraine should take regional context and “historical specifics” into account.
Biden reassured Ukraine that Obama’s bid to “reset” relations with Russia would not hurt Ukraine’s push for integration with the West, saying better ties with Moscow “will not come at Ukraine’s expense.”
“To the contrary, I believe it can actually benefit Ukraine,” he said. “The more substantive relationship we have with Moscow, the more we can defuse the zero-sum thinking about our relations with Russia’s neighbors.”
The Russia-US summit on July 6-8 aimed to make a new start in relations, which reached post-Cold War lows after Russia’s war with Georgia last August. Obama stressed that “NATO seeks collaboration with Russia, not confrontation.”
Mindful of a rift within Ukraine about joining NATO, Biden said the U.S. would not dictate to the nation, but emphasized that “if you choose to be part of Euro-Atlantic integration – which I believe you have – that we strongly support that.”
Polls have shown a majority of Ukrainians oppose NATO membership, and European allies have been more wary than the United States about bringing Ukraine into the alliance. While NATO has stressed that the door remains open, Russia’s war with Georgia deepened concerns by hinting at the lengths Moscow is willing to go to keep neighbors out of the Western alliance.
The war also raised alarms in Ukraine about Kremlin intentions toward a nation many Russians see as inextricably linked to their own. Biden stressed that “the United States supports Ukraine’s sovereignty, independence and freedom, and to make its own choices – its own choices – including what alliances they choose to belong.”
Russia’s envoy to NATO, Dmitry Rogozin, drily dismissed Biden’s trip as “psychotherapy” aimed to comfort Ukraine and Georgia, and said neither has a chance of joining the alliance any time soon.
Welcoming Biden, Yushchenko called Ukraine a “European country where democracy rules” – seeking to set it apart from Russia, which has often-acrimonious relations with the European Union and has faced accusation of a retreat from democracy in the past decade.
“We are going forward, we have chosen a European path,” Yushchenko said.
He also called for U.S. investment in upgrading Ukraine’s natural-gas pipeline network, which carries large volumes of Russian natural gas to European consumers. Russia turned off the taps during a price dispute in January, leaving many Europeans without gas for two weeks and prompting the EU to step up efforts to find alternative supply routes.
Accompanied by Yushchenko, Biden placed flowers at a memorial to victims of a deadly 1932-33 famine engineered by Soviet leader Josef Stalin’s government – the focus of one of several disputes between Ukraine and Russia over history. Yushchenko is seeking international recognition of the famine that killed millions of Ukrainians as genocide, while Russia adamantly argues that Ukrainians were not specifically targeted.
Biden later met with Prime Minister Yulia Tymoshenko, a former Yushchenko ally who is now a bitter foe and chief challenger in January’s presidential election. He also met with opposition leader Viktor Yanukovych and former parliament speaker Arseniy Yatsenyuk, who also plan to seek the presidency.
Biden urged the feuding leaders to put disagreements behind them and get down to fixing the country’s devastated economy. “Working together, especially in times of crisis, is not a choice, it’s an absolute necessity,” he said. “Compromise … is not a sign of weakness, it is evidence of strength.”
The rivalry has played into the hands of Yanukovych, who has warmer ties with Moscow and is popular in Ukraine’s largely Russian-speaking east.
Biden on Wednesday visits Georgia, whose strategic location along a key energy route has made it a geopolitical battlefield between Moscow and the West.
Russian forces quickly crushed the Georgian army last August after Georgian President Mikhail Saakashvili launched an offensive targeting the Moscow-backed breakaway province of South Ossetia to try to bring it under control.
Russia has defied the West by deploying thousands of troops in South Ossetia and another separatist province, Abkhazia, and recognizing both regions as independent nations.
Biden: U.S. intention to improve relations with Russia cannot compromise relations with Ukraine
The United States intentions to improve relations with Russia cannot compromise the country’s relations with Ukraine, U.S. Vice President Joe Biden has said.
He was speaking at a meeting with Verkhovna Rada Chairman Volodymyr Lytvyn in Kyiv on Tuesday, the press service of the Ukrainian parliament has said.
Biden told those present that his visit to Ukraine was approved while U.S. President Barack Obama’s visit to Russia was being planned.
The U.S. Vice-President has noted that his country has maintained two principled positions: firstly the U.S. doesn’t agree that Russia cannot influence any country, and secondly each country can decide, what relations it will be building.
He also noted that all the states that lived through the so-called colored revolutions are always facing a crossroad and assured the Verkhovna Rada speaker that the United States will support Ukraine.
Ukraine, Russia need new agenda of bilateral relations, Yatseniuk tells Biden
Leader of Ukraine’s Front for Change initiative Arseniy Yatseniuk has said that Ukraine and Russia need a new agenda of bilateral relations.
He said this at a meeting with U.S. Vice President Joe Biden in Kyiv on Tuesday
“We have touched on the Ukrainian-Russian relations… We need a new agenda of the Ukrainian-Russian relations and I have briefly expressed my viewpoint on this issue,” Yatseniuk told reporters at a briefing following his meeting with Biden on Tuesday afternoon.
The Front for Change leader also said that they didn’t discuss with the U.S. Vice President the issue of NATO or the upcoming presidential elections in Ukraine, but focused on the global economic turmoil instead.
Biden, Yanukovych discuss energy security
Viktor Yanukovych, the leader of the Party of Regions, and U.S. Vice President Joe Biden have discussed energy security issues. “It was discussed,” Yanukovych told reporters after a meeting with Biden in Kyiv on Tuesday.
According to him, it is important for Ukraine to build transparent relations with its strategic partners, such as the European Union and Russia.
“Ukraine, as a transiting country, is interested in having an efficiently working gas transportation system and see it modernized in the near future, for which it is definitely necessary to draw investment, and both the EU and Russia should be involved as strategic investors. They can be Ukraine’s partners in this issue,” Yanukovych said.
He also mentioned the initiative of setting up an international consortium.
Ukrainian President Viktor Yuschenko earlier said after his meeting with Biden that Ukraine would welcome U.S. investment in the modernization of Ukraine’s gas transportation system.
Yanukovych assures Biden he is ready for compromise with other political forces
Leader of the Regions Party Viktor Yanukovych has assured U.S. Vice President Joe Biden that he is ready for compromise with other political forces in Ukraine.
“I repeated his own phrase to Mr Vice President that strong politicians, strong people, they always look for a compromise and find it,” he told the press after his meeting with Biden in Kyiv on Tuesday.
The Regions Party’s leader also said that he had announced many times his readiness to “choose peace between war and peace.”
Biden earlier said that the United States called for Ukrainian politicians to join efforts to tackle the recessions.
Yanukovych, Biden touch upon future presidential elections in Ukraine
Viktor Yanukovych, the leader of the Party of Regions, and U.S. Vice President Joe Biden have touched upon future presidential elections in Ukraine during their recent meeting in Kyiv.
“As for the future elections, I’ve very briefly emphasized that we’re interested in the fair and transparent elections,” Yanukovych told reporters after the meeting in Kyiv on Tuesday.
He also added that the Party of Regions is interested in U.S. observers at the elections “who could create equal conditions for every candidate.”
Yanukovych also said that he had heard the U.S. Vice President’s viewpoint on the economy in Ukraine, relations with the International Monetary Fund, and democracy-related issues.
Among other representatives of the Party of Regions at the meeting were MPs Serhiy Levochkin, Mykola Azarov and Hanna Herman.
Future of Ukraine and bonds to U.S and EU
The next election of the Ukrainian president is scheduled for January 17, 2010 and it remains to see if U.S will take a preference amongst the 4 candidates he has met with during his trip to Ukraine this year.
It is important however, to observe that U.S is quite open when it comes to its desire to bring Ukraine towards Western Europe and form a stronger alliance with Europe both in a political as well as in military sense.
It remains to see how U.S will play their cards when it comes to gas politics in the region, as EU has taken ownership in Nabucco gas pipe line, which is in direct competition to North Stream which Germany and Russia favours.
However, U.S has shown its commitment to assist Ukraine in its path towards a true democracy, however, much of the work and responsibility will rest on the shoulders of the present leadership in Ukraine and its future ones. There is no room for Ukraine political leadership to make lots of diversions now. They need to commit themselves to a path that is clear to the outside world as well as the domestic economic forces and business. Unless Ukraine manage to show strength through the economic turmoil they experience at the moment, it can get worse and set Ukraine back several decades. It can be a domestic reset button for Ukraine economy and development towards a democratic state.
Ukraine is looking for the leader that will bring Ukraine out of the crisis, but also can unite its people to pull in one direction towards prosperity of all levels within Ukraine. There is a need to modernize the public as well as in private business sector.
At the moment it looks like there is only one candidate ready to take this challenge on his shoulders and try to unite the people of Ukraine and at the same time have enough stamina to keep international relations at a good stronghold.
This candidate is most likely Arseniy Yatseniuk which collects more and more support amongst the Ukrainian people with his diplomatic skills and experience.
He has a background as civil engineer and geoscientist. He has worked mainly within the oil and gas industry from the mid 1980s. He has written a few fictional novels as well as being the author of some professional litterature within oil and gas sector, he is now an editor of some web sites.
Article from articlesbase.com
Find More Milling Vice Articles
12″ X 30″ CNC Lathe ,Tft Flat Screen, Dual Electronic Handwheels for Manual Control, Hardened and Precision Ground Bed Ways ,High Alloy Gears Hardened,3-bearing Spindle Support, Automatic Homing , Automatic Lubrication System, Coolant System Included
- GSK CnC Control teach and playback programming
- Full G-code CNC Capability
- Conversational graphics programming
- Auto spindle jog during gear changes
1.GSK CNC control.
2. Manual machining function
3. Teach and playback programming
4. Conversational graphics programming
5. Full G-code CNC capability
6. Auto spindle jog during gear changes
7. Vector control spindle drive
8. Simultaneous multiple M-codes (up to 3)
9. Feedrate override:0-120%
10. Spindle override:0-120%
11. Animatde tool path graphics
12. RS-232 serial port
13. Backlash error compensation
14. Ballscrew pitch error compensation
15. Run-time/Part-count sisplay
16. Ballscrew pitch error compensation
17. Primary CNC M-code controllde
18. Power contactor
19. Secondary CNC M-code controlled
1. Model – CK6130
2. Swing over bed – 11.8″
3. Swing over corss slide – 7″
4. Distance between center – 29.5″
5. Width of bed – 8.66″
6. Spindle bore – 1-1/2″ 7. Spindle nose – MT5
8. Spindle tape – 6MT
9. Spindle speeds – 80-2300R/MIN
10. (Vector spindle control)100-1600RPM
11. Spindle Motor – AC/4HP 3 phase 220V
12. Cross slide travel(X-axis) – 6″
13. Longitudinal travel(Z-axis) – 25″
14.Rapid traverse(X/Z-axis) – 100 IPM/200 IPM
15. STEP motor torque(X/Z-axis) – 6N.M./12N.M 16. Tailstock quill diameter – 1.77″
17. Tailstock taper – 3MT
18. Tailstock travel – 3.7″
19. net machine weight – 2648lbs
20. Shipping Weight – 2978lbs
12″ X 30″ ,Tft Flat Screen, Dual Electronic Handwheels for Manual Control, Hardened and Precision Ground Bed Ways ,High Alloy Gears Hardened,3-bearing Spindle Support, Automatic Homing , Automatic Lubrication System, Coolant System Included
DELCAM MOVES INTO ITS NEW STATE-OF-THE-ART CENTRE
Invests close to a million dollars in the new facility
-Launches its Engineering Services Division-
: Delcam, one of the world’s leading suppliers of advanced CADCAM software product development solutions for the manufacturing industry recently inaugurated its state of the art centre in Pune. Delcam India completed its 7th Anniversary last month, and is now one of the most popular CAD/CAM software solution providers in the business.
With over 800 customers across India in various domains like Aerospace, Automotive, Toolmaking, Jewellery & Woodworking, Packaging etc, Delcam has created a niche by revolutionising the Design-to-Manufacture process in all the industry levels, be it small, medium or large scale. The new facility which has been set up at a cost of a million dollars has state-of-the-art facilities and revolves around the ideals of total commitment to customers. Various divisions and support departments cater to customers across the spectrum of application verticals, and are instrumental in keeping the down-times low for their customers.
Delcam India started operations in the year 2000, after an initial approach to the Indian Industries through Distributors. The Distributor model was reasonably successful; with time, in order to maintain Delcam’s global practice of ‘Customer Focus’, Delcam Plc decided to open a direct office in India. Delcam India is a part of Delcam PLC, UK, which is a CAD-CAM software company with a presence in over 60 countries.
Delcam has always considered “After Sales Support” as “The Defining Factor” and the only possible way to achieve this was through a direct office. The first office was opened in Pune. Over the years Delcam opened offices throughout the country, now numbering 11. Delcam covers the length and breadth of the country with it’s network of offices having trained, dedicated and committed associates taking care of customer support. This has helped achieve the quick and positive upward growth that Delcam India has seen over the years.
Delcam India comprises of three Subsidiaries of Delcam PLC namely (1) Sales & Support, (2) Software Development & the recently opened (3) Engineering Services Division. The opening of the services division coincided with the inauguration of the company’s own new building which was done recently.
Speaking at the occasion Vineet Seth, MD – India and Middle East, said, “The CAD CAM business is divided into various verticals; We cater to the automotive, aerospace, toolmaking and some niche segments. The niche segments we excel in are jewellery, shoe design, orthopaedics and medical design, among others.”
The Sales & Support, R & D, and Technical Consultancy Services also dwell upon each other mutually to bring latest technology to the forefront.
Delcam has approached the Industry in India with application specific solutions, rather than generalised ones, which have produced profitable results for the customer consistently. This has been possible with the dedication of Delcam’s Sales & Support team which has been on its toes ever since Delcam started operations in India.
Delcam’s belief is to be in close contact with the customers, so as to comprehend the minutest of problems faced by them in their manufacturing cycle, which helps respond quicker to them, and their problems are sorted out much faster. Delcam today has local sales and support offices in Kolkata, Ludhiana, New Delhi, Mumbai, Kolhapur, Rajkot, Bangalore, Chennai, , Coimbatore, & Hyderabad.
Mr. Pulak Mukherjee, Director Delcam Software India Pvt. Ltd, said, “For our customers, time is money, and any non-productive time on their machines is a loss. Our efforts are always to maintain that there is no down-time for our customers.
Delcam India shares their success story with their 70+ associates, most of who have been with the organisation from very early days. Delcam has always aimed to provide a very good work culture to all it’s associates which is based on trust, respect and inspiration.
Delcam PLC is one of the world’s leading suppliers of advanced CADCAM software product development solutions for the manufacturing industry. The company has grown steadily since being founded formally in 1977, after initial development work at Cambridge University, UK. It is now the largest developer of product design and manufacturing software in the UK, with subsidiaries in North America, Europe and Asia. Delcam’s software is used by more than 15,000 organisations in over 80 countries.
Delcam’s software are used for the following categories:-
Engineering & Machining:-
• 5 Axis Machining
• High Speed Machining
• Automated Machining
• Adaptive Machining
• Mould Making
• Reverse Engineering
• Tool Making
• Swiss Turn
• Port Machining
Plastics & Packaging
• Mould Making
• Automotive Plastics
• Product Design
• Ceramics & Cutlery
• Engraving & Cabinet Making
• Product Design
• Signmaking & Woodworking
Medical & Dental
Other Solutions offered (Software that is non-industry specific)
• Custom Services
• CAD Translation
• Collaborative Manufacturing
• Rapid Prototyping
Delcam’s various softwares:-
PowerMILL is the world’s leading specialist NC CAM software for the manufacture of the complex shapes typically found in the toolmaking, automotive and aerospace industries. Key features include a wide range of strategies, including the latest high-efficiency roughing, high-speed finishing, and 5-axis machining techniques, exceptionally fast calculation times and powerful editing tools to ensure optimum performance on the machine tool.
PowerSHAPE CAD software provides a complete environment to take your product ideas from concept to reality. PowerSHAPE offers unrivalled freedom to manipulate surface form of the CAD model, to build from wireframe and make global changes with solid feature operations and editing. PowerSHAPE follows the philosophy of “Simple to create, easy to modify”. PowerSHAPE includes all PowerSHAPE’s core hybrid modelling tools as well as a number of features that are focused specifically upon the needs of designers.
Inspection equipment and processes are both undergoing rapid changes as companies move from using 2D drawings to CAD models as the preferred method for product definition. This change, coupled with the rising demand for companies to prove the quality of their products, has led to a growing demand for inspection methods that can be used throughout the prototyping, manufacturing and assembly chain. With these techniques, any problems can be highlighted earlier in the development process and so be corrected more quickly and at lower cost.
The ArtCAM software product range provides a unique CAD modeling and CNC CAM machining solution. ArtCAM allows you to create high quality products from 2D artwork faster than you ever thought possible. ArtCAM is the complete software solution for 3D Jewelry Design, 3D Woodworking, 3D Signage, 3D Engraving and 2D CNC Routing.
In recent years reverse engineering has been seen as a necessary yet time consuming engineering process, invariably requiring highly skilled resources. This is no longer the case as CopyCAD is quick, simple and interactive, offering even casual users the power to quickly solve engineering problems, from closing the loop on development cycles with copy milling, to feeding free form organic surfaces into the front end of the design project. By embracing the potential of scanned point cloud data, CopyCAD offers solutions constrained only by the imagination of the user.
Exchange is Delcam’s CAD translation solution. Exchange is a powerful stand alone CAD translator program capable of translating from many popular CAD input formats to many output formats (see what’s new). Downloading Exchange and opening and viewing files from all compatible systems is free and without obligation – and everything is confidential as you don’t have to send any of your CAD data files over the internet. You only pay when you chose to save the files you have translated on a pay-per-translation basis by credit card.
FeatureCAM, developed by Delcam, is a suite of CAD/CAM software which combines cutting edge technology with ease of use. FeatureCAM automates machining and minimizes programming times for parts on mills, lathes and wire EDM.
PartMaker applies a Patented Visual Programming approach to make CNC programming quicker and easier. PartMaker is a Windows-developed CAM system that utilizes Knowledge Based Machining to greatly reduce part programming time – 70% in fact, versus competing systems
Delcam Crispin CAD Suite is a PC-based system which is made up of several software modules. Each module can be used independently of the others and combined give a full ShoeDesign to manufacturing solution, including TechPac a comprehensive production instruction system.
Article from articlesbase.com
Related Cnc Swiss Turning Articles
Recently, Yi County Government released “in 2010 to support the views of Cocoon and Silk Industry,” “opinion” that: Since last year, with the sharp rebound in the price of cocoons, silkworm breeder Zaisang enthusiasm to a certain degree of silkworm raising, but throughout the year feeding volumes are continuing to decline. By the international silk market impact, cocoon silk industry is still in a period of adjustment, do the work of Cocoon and Silk 2010, the promotion of farmer income, industrial development is important.
Yixian County sericulture base to consolidate its dominant position, stability and development in this specialized industry, “Opinions” put forward the following measures:
(1) on the harmonization of procurement done by the county silk, transporting, the township paid for each household and the difference between the subsidy introduced mulberry varieties, farmers only to the host villages (or sericulturist professional cooperatives) pay 0.15 yuan per plant paragraph mulberry, on more than 50 acres of contiguous development of Mulberry update, pay 0.40 yuan per plant paragraph mulberry, had subsidized the difference. Contiguous development on 500 acres (including the original base part) above sericulture base, the development of mulberry and accepted the new post-subsidy per plant and then 0.10 yuan;
(2) reform of the existing mode of operation of silkworm eggs, to reduce intermediate links direct the implementation of silkworm eggs. Order and payment of silkworm eggs silkworm farms, the county commission or township people sericulturist professional cooperative service center agents, who ordered the use of the County of silkworm eggs, county uniform price per box 33 per order charge;
(3) sericulturist professional cooperatives in order and use the cardboard box cluster, 0.5 Yuan subsidy per tablet;
(4) implementing the protection of good quality cocoon price subsidies, the 2010 quarterly average price of cocoon purchase less than 16 yuan / kg, the sericulturist unified by sericulturist professional cooperatives sell the cocoon quality of quality standards (the whole box cluster pupation cocoon, Ganjian pay factory quality indicators: the rate of more than 95% car cocoon, reelability more than 70%, less than 300 gross fold), in accordance with the practice to protect the average price spread price and purchase subsidies.
“Opinions” also on the county site Mulberry silkworm silkworm breeding bases, sericulturist professional development and growth of cooperatives and silk to give key support enterprise development, while encouraging all relevant enterprises and individuals to carry out comprehensive utilization of sericulture.
With Wireless networking you can enjoy a flexible and clutter free computing experience. May be you can have a computer in your drawing room and you have it directly plugged into the cable or DSL modem. Now if you buy another computer or laptop and want to use the new device at another end of the house you may need to connect it with cables. Rather than cabling, you can access the Internet and other peripherals easily if you add this new computer or laptop wirelessly, suggest computer support experts.
If you want to share the same printer from both the computers then again you can connect the printer wirelessly. To connect your computer wirelessly you will need to have cable or DSL modem and of course a built in wireless router. You can also buy a wireless router to connect it to your modem, suggest the technicians for computer support. Router generates radio signals. That enables two way communications between the device with the wireless network adapter and the router. The wireless equipped devices can be laptops, printers, iPods, computers and even mobile phones. If your computer does not have the built in adapter for router, you can buy a new one and can insert it into the USB port of your computer.
So if you are thinking about the differences of wired and wireless connection guys for computer support explains the thing very interestingly. They suggest that if you think the wireless network is connected by invisible wires then the other things are just the same except some high definitions applications.
Tech support guys suggest you to be aware about the security concern about the wireless connection. The good thing about the wireless network is that you can control access to the wireless network so you can control the access within the stuff of business enterprise or within your family members. But sometimes the access control option in a wireless router can be turned off by when they come from the manufacture’s factory. For this computer support guys suggest you to check the setting of the router and can configure it so that you can ensure that you have allowed the access only to the authorized users.
You can set the access control by following some steps suggested by the tech support guys. You can set the WEP or WPA encryption enabled on your router and can set a network password or key so if anyone tries to access the network will be needed to provide the password. You can use this method to manage unauthorized access to your network. The users whom you will like to access the network should be given the password. The password can be changed if you would like to change it.
You can also control the access to your network by allowing only some familiar devices to access the network. This security method can be ensured by MAC addresses that are built into most of the digital services. For this method the list of the addresses are needed to be stored in the router. Before allowing the network access each and every device will be needed to be identified itself by the MAC address it provides.
Following these computer support methods you can control network access by different devices. When you are using wireless networking the question of security is important because chances of getting hacked are very high here.
With a great experience and exposure on tech support services, James Madison helps common non technical persons to encounter and resolve bugging computer issues. He wrote a number of articles on subjects like computer support, tech support, computer help and other technical issues.
Article from articlesbase.com