Posts tagged "Stainless Steel"

how can I cut stainless steel ?

Plasma Cutter
hector596 asked:

I want to cut a stainless steel 1/4 in. plate ( a circle on that plate), but plasma cutters are very expensive and I cant afford it, cutting torch can’t do stainless steel,abrasive discs can cut only in straight line but I need to cut a 2″ circle on that plate , it is any other method or tip that I can try?

CNC Community

Posted by Ivan Irons - June 7, 2011 at 10:30 pm

Categories: Maintenance & Repairs   Tags: , , , ,

Does a plasma cutter reduce ANY of stainless steel\’s (stainless) quality? For HHO Generator?

Plasma Cutter
nick j asked:

HHO generator cell plates and will be in highly corrosive environment.. Band saw is not working well for large production. Any other suggestions will be greatly appreciated! Thanks!

CNC Video

Posted by Ivan Irons - September 21, 2010 at 10:16 am

Categories: Do It Yourself (DIY)   Tags: , ,

Can a CNC router cut through stainless steel?

cnc router
Antony G asked:

I need to cut some shapes out of 0.8mm thickness stainless steel using a cnc router and I basically need to know if it is possible. Importantly, the cutting tip size must be no larger than 1.5mm. It would be OK to cut through the stainless steel on more than one pass. I’m just thinking that the cuttting blade would go blunt almost immediately. Would a diamond tipped cutter blade do the trick. If it is possible what would be the best cutter blade to use?

CNC Jobs

Posted by Ivan Irons - August 23, 2010 at 3:31 pm

Categories: Do It Yourself (DIY)   Tags: , , , , ,

Fadal cutting 316L stainless Steel CNC Mill

matt321123 asked:

Fadal 2216 (special built) cutting a 316L part with a mitsubishi cutter.

CNC Basics

Posted by Ivan Irons - October 29, 2008 at 11:53 am

Categories: Howto   Tags: , , , , ,

How do I cut flat stainless steel?

Plasma Cutter
Debbie asked:

I need to know what I need to cut a flat sheet of stainless steel that is 1/8 thick. I need to cut it in 4×6 panels without using a torch or plasma cutter. I need to know what kind of saw and blades would be best

CNC Basics

Posted by Ivan Irons - October 4, 2008 at 11:30 pm

Categories: Maintenance & Repairs   Tags: , ,

решебник по английскому тетрадь биболетова игры молния онлайн на сайте найти справочник телефонов сахарные заводы база данных билайн online смс перехват с мобильного на mail адрес квартиры по телефону челябинск логические игры адрес по фамилии харьков на сайте поиск человека по дате рождения адресу справочник адресов и индексов мобильный локатор нсс игры онлайн магия кристаллов игры для справочник адресов база данных утраченных телефонов начать новую игру танки онлайн местоположение - номер телефона - через компьютер онлайн дженерик аптека Конский блог силденафил купить sitemap