Posts Tagged ‘Plunge’
Amana Tool 45312 Straight Plunge 1/2-Inch Diameter by 2-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit
- New superior geometric design for super clean cuts
- 1/2-inch cutting diameter
- 2-inch cutting height, 4-1/4-inch length
- 1/2-inch shank, 2 flute
- Carbide tipped, industrial quality
Product Description
Carbide Tipped Router Bits Type: Straight Bit Cutter Diameter: 1/2 Shank Diameter: 1/2
i am going to cut and drill aluminium 10 mm thickness sheet in cnc router machine?
loyed83 asked:
please help me to get the right feed rate , plunge rate the dwell time and rpm for cutting and drilling the aluminium 10 mm thickness sheet
g-code
please help me to get the right feed rate , plunge rate the dwell time and rpm for cutting and drilling the aluminium 10 mm thickness sheet
g-code
Posted in Engineering | 
Tags: Aluminium Sheet, Cnc Machine, CNC Router, Cutting, Plunge, Router Machine, Rpm | 
1 Comment »
CNC Router – Need help with bits, feed speeds, etc?
Chris Fulton asked:
I have a newly built CNC router. Its built off of the HobbyCNC plans. It has a HobbyCNC controler (3 axis) with 305oz motors. The ‘router’ is a trim router that takes 1/4″ bits.
I have a newly built CNC router. Its built off of the HobbyCNC plans. It has a HobbyCNC controler (3 axis) with 305oz motors. The ‘router’ is a trim router that takes 1/4″ bits.
I’m looking for help with some guidelines regarding selecing the right bit, plunge rate and feed speed. I’m cutting some 1/2″ maple, but also want to cut and engrave acrylic.
Is there someplace that gives this type of info?
CNC Lathe
Posted in Do It Yourself (DIY) |
Tags: Axis, CNC Router, Hobbycnc, Plunge, Router Bits, Router Help |
2 Comments »