CNC Information | CNC Videos

Posts Tagged ‘Lathe’

Product Description
Features: • Anilam 4200T with 12.1 TFT Flat Screen CNC Control • Dual electronic handwheels for manual control • Hardened and precision ground bed ways • High alloy gears hardened, ground and honed • 3-Bearing spindle support • Automatic homing • Easy access chip removal • 4 Station Programable Turret • Automatic lubrication system • Coolant system with 5.5 gallon coolant tank • Teach In Mode • 255 Pairs of Tool Offsets • Rigid Tapping is Standard • Fully enclosed Cabinet • Turcite B on carriage sliding surfaces Specifications: Swing over Bed (in.): 16 Swing over Cross Slide (in.): 8 Swing Through Gap (in.): 25-7/8 Distance Between Centers (in.): 40 Spindle Bore (in.): 3-1/8 Spindle Mount: D1-8 Spindle Taper W/ Sleeve: MT-7 Number of Spindle speeds: Variable Range of Spindle Speeds: (RPM) 100 – 2000 Range of Longitudinal Feeds (IPR): 394in/min Range of Cross Feeds (IPR): 315in/min Max Tool Size (in.): 1 x 1 Cross Slide Travel (in.): 9 Carriage Travel (in.): 35 Tailstock Spindle Travel (in.): 5 Taper in Tailstock Spindle: MT-5 Steady Rest Capacity (in.): 3/8 to 7 Width of Bed (in.) :13-3/8 Motor: 10HP, 230V, 3Ph Height: 77 inch Width: 56 inch Length: 101 inch Net Weight: 5680 pound Standard Equipment: •10″ 3-jaw chuck •16″ Face plate •Work light •Steady and follow rest •Tool box and tools

Jet 320930 CL-1640ZX-CNC 16″ x 40″ Large Spindle Bore CNC Lathe With Anilam 4200T Control

Product Description
This digital document is an article from Modern Machine Shop, published by Gardner Publications, Inc. on February 1, 2010. The length of the article is 326 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.

Citation Details
Title: Short bar loader for CNC lathe automation.(MODERN EQUIPMENT REVIEW)
Author: Unavailable
Publication: Modern Machine Shop (Magazine/Journal)
Date: February 1, 2010
Publisher: Gardner Publications, Inc.
Volume: 82 Issue: 9 Page: 112(1)

Distributed by Gale, a part of Cengage Learning

Short bar loader for CNC lathe automation.: An article from: Modern Machine Shop

www.glacern.com http Glacern Machine Tools Turning a rook chess piece out of 2.5″ diameter 6061 aluminum bar stock on a Mori Seiki NL2500SY-700 CNC Turning Center, utilizing the Y-axis, C-axis, and live tooling.

Hello, I uderstand the basic needs, step motors, controller, break outs boards and software…But there are so many variable that I’m getting confused as to what would work the best. Has any body done this? How do I get the ball rolling?

Product Description
Victor Group. Taichung Machinery Works Co. Ltd.

Victor Vturn Series CNC Lathe Operation Manual

Muratec Murata MW400 CNC Lathe in action. Large capacity, high quality, high volume state of the art turning technology.

Product Description
Publication No. 2221-E-R1

Okuma LH35-N CNC Lathe With OSP5000L Parts Book Manual

www.glacern.com http Glacern Machine Tools Mass production turning of an aerospace part. Material is 1.0″ diameter alloy steel. The machine is a Mori Seiki NL2500SY-700 CNC Turning Center with a Y-axis, C-axis on both spindles, live tooling, and a subspindle.

Product Description
This digital document is an article from Modern Machine Shop, published by Gardner Publications, Inc. on November 1, 1989. The length of the article is 1077 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Grab the quick CNC lathe changeover. (computer numerical control)
Author: Scott Looney
Publication: Modern Machine Shop (Magazine/Journal)
Date: November 1, 1989
Publisher: Gardner Publications, Inc.
Volume: v62 Issue: n6 Page: p76(4)

Distributed by Thomson Gale

Grab the quick CNC lathe changeover. : An article from: Modern Machine Shop

i have been trying to get a job doing this and everyone wants experience…i dont have any so i was gonna go to school for it