Posts tagged "Hobbycnc"

Cnc maching strut brace endlinks

This video shows how I used my cnc lathe to create one part of my custom BIG strut braces for volvo 240′s. Machining nerds, it’s a Grizzly G0602 lathe converted to CNC with 425oz motors (only at 24v), HobbyCNC board (great!), Mach3 (of course!), and a fancy “just for aluminum” 35° insert that works incredibly well. 10ipm rough cuts at 0.020″ cut, 3ipm finish pass at 0.008″ cut. I LOVE CNC!!!!! Next up, converting my Grizzly mini mill to CNC. All the parts have been purchased, just need the time!

6 comments - What do you think?
Posted by Ivan Irons - June 6, 2011 at 9:37 am

Categories: CNC Lathe   Tags: , , , , , , , ,

Home made Cnc router mill Hobbycnc Emc2 first works!

Cnc HobbyCNC Pro Driver Board working with emc2, Gcode made with Cambam. First works!

Be the first to comment - What do you think?
Posted by Ivan Irons - May 19, 2010 at 6:54 am

Categories: CNC Router   Tags: , , , , , , ,

CNC Router – Need help with bits, feed speeds, etc?

cnc router
Chris Fulton asked:

I have a newly built cnc router. Its built off of the HobbyCNC plans. It has a HobbyCNC controler (3 axis) with 305oz motors. The ‘router’ is a trim router that takes 1/4″ bits.

I’m looking for help with some guidelines regarding selecing the right bit, plunge rate and feed speed. I’m cutting some 1/2″ maple, but also want to cut and engrave acrylic.

Is there someplace that gives this type of info?

CNC Lathe

Posted by Ivan Irons - May 14, 2010 at 10:35 pm

Categories: Do It Yourself (DIY)   Tags: , , , , ,

решебник здесь как найти на сайте read someones text messages track spy cell phone на сайте купить дженерики sitemap