Archive for the ‘CNC Podcasts’ Category

Originally posted 2007-11-15 01:45:03. Republished by Blog Post Promoter

Originally posted 2007-11-15 01:59:01. Republished by Blog Post Promoter

This CNC Ecourse video covers the design for CNC.  There are a number of questions we ask as we are designing.

Really when you are designing, you are trying to describe what you are going to build.  The more accurately you can do that, the better the whole process will go.  Just like a house, if you have a strong foundation, you will have a good house.  If you have a solid design, the rest of the process is easy.

CNC Stomp Pad Video 10: Final Assembly of the Stomp Pad – Final Photos of the Project

Here is the final video in the CNC Stomp Pad Tutorial Video Series. In this video, we go over the final assembly of the stomp pad Here is the final video in the CNC Stomp Pad Tutorial Video Series. In this video, we go over the final assembly of the stomp pad. Then we watch as we used double sided tape to adhere it to the snowboard. Finally we take a look at some final photos of the CNC Stomp Pad on the Snowboard.
One Final Note:
The Stomp Pad works perfectly. I love the fact you can customize your life with CNC.

See you on the slopes,
Ivan Irons

CNC Stomp Pad Video 9: Drill holes, clean holes, flatten and final sand of the CNC Stomp Pad

In this video we drill the holes in our CNC Stomp Pad. We need to add the traction spikes and they are really a screw and nut. We drill the holes then clean them out.
We bend the stomp pad while drilling and we must hammer it flat next.
A quick DA Sanding to make the pad look good, then we are on the the next step which is finalizing the CNC stomp pad.

 CNC Stomp Pad 8 | Sanding & Spikes

During this CNC Video Segment we sand our CNC Stomp Pad with a Dual Action (DA) sander. We are taking out any deep scratches and giving it a matte finish. The CNC Plasma Cut part then is taken over to a stand. We look at different traction spikes and how they will look. After selecting a spike type, we start laying them out. We layout some marks where we will drill holes in the next video.

During this CNC Video Segment we sand our CNC Stomp Pad with a Dual Action (DA) sander. We are taking out any deep scratches and