Archive for September, 2008
MILL2LATHE converts your CNC mill to a CNC lathe!
mill2lathe asked:
Convert your CNC milling machine to a CNC lathe! www.mill2lathe.com. ORDER at www.usshoptools.com or 800-243-7701.
CNC Video
CNC Mill Mach3 Control Panel Part 1
mnorth1 asked:
I whipped up a control panel for my mill so I do not have to rely entirely on the keyboard
g-code
how can I cut stainless steel ?
hector596 asked:
I want to cut a stainless steel 1/4 in. plate ( a circle on that plate), but plasma cutters are very expensive and I cant afford it, cutting torch can’t do stainless steel,abrasive discs can cut only in straight line but I need to cut a 2″ circle on that plate , it is any other method or tip that I can try?
CNC Community
I want to cut a stainless steel 1/4 in. plate ( a circle on that plate), but plasma cutters are very expensive and I cant afford it, cutting torch can’t do stainless steel,abrasive discs can cut only in straight line but I need to cut a 2″ circle on that plate , it is any other method or tip that I can try?
CNC Community
ohiopctechDOTcom\’s Homebrew Mini CNC Mill
ohiopctech asked:
it’s 3 random precision linear slides that i found and bolted them all to an 8″ drill press frame, they have been indicated into squareness and connected to stepper motors, a SP3 stepper drive card, then hooked to an old PC running Realtime Ubuntu Linux and the EMC2 Machine Control Software from LinuxCNC.org.
CNC Mill
Engraving with the Easy CNC mill
tomtechart asked:
OK here it is. The follow up to the Easy to Build CNC Mill. Here it is engraving in Plexiglas and making a PC board
CNC Basics
